Guides
Each guide does one job. They assume you’ve done the tutorials, so they skip the teaching.
- Put a real bot on the benchBench mode for the broker, a real bot's config and first flash, and driving it from the page
- Logins and certificatesThe logins for drivers, services and bots, in bench mode and on a broker whose certificates come from Vault. Making, changing, using and revoking them
- Flash a botBuild gl_zero's firmware, flash it over USB, update it over the air
- Set up the overhead cameraA network camera over the desk, so the station knows where real bots are: markers, the lens's calibration, the position service
- Record a run and play it backKeep everything a fleet says during a run, read it as text, or watch it again on the page
- Run the acceptance runMilestone 1's pass or fail: a go-to and a square, judged by how far off the car ends up
- Run and add bench programsBuild, flash and watch a hardware test program, and add a new one
- TroubleshootingWhen a real bot doesn't move, resets, runs backwards or drops off the Wi-Fi
- Safety sheetOne printable page for real bots on a table: stops, batteries, the table, people, what to do when one misbehaves